Home Silicone Resin Molds Clearance Sale

11.75x3.75 Cylinder Silicone Mold For Epoxy Resin - Woodturning Bowl – Crafted Elements

By A Mystery Man Writer

Last updated 11 May 2024

11.75x3.75 Cylinder Silicone Mold For Epoxy Resin - Woodturning Bowl – Crafted Elements

Interior Size: 11.75x3.75" Fluid Volume: 225oz / 6654ml Wall Thickness: 3/4" Material: Platinum Cure Silicone - Shore 30A Interior Finish: Polished With Minor Imperfections - See Description The 11.75x3.75" silicone mold is mold for woodturners looking to create large 11.75" diameter resin and wood bowl blanks up to 3.

Interior Size:	11.75x3.75
Fluid Volume:	225oz / 6654ml
Wall Thickness:	3/4
Material:	Platinum Cure Silicone - Shore 30A
Interior Finish:	Polished With Minor Imperfections - See Description

The 11.75x3.75 silicone mold is mold for woodturners looking to create large 11.75 diameter resin and wood bowl blanks up to 3.75 tall that they can then turn on a lathe.

This mold can be used with various types of resin, concrete, and even mixed media such as a combination of live edge wood and resin.

Important: This mold is considered a rough form. While the interior of the mold is glossy / shiny you can expect small deviations or pinholes in the surface of the mold. You can also expect a deviation in diameter up to 1/4. Unlike our Grade B molds where the imperfection unintentionally happened in production of the silicone mold, the rough form molds, such as this one, have imperfections strictly due to the imperfections in the tooling, also known as the master form or blank that we use to create the silicone mold. As this is a low volume mold created primarily for wood turning, a perfect surface finish was not a requirement and enabled us to keep tooling costs down, which in turn helps to keep the final silicone mold cost down. If you are using this for resin casting or floral preservation, be aware that you will likely have to sand and polish, or sand and flood coat your piece to get a perfect, consistent finish.